When your furnace won’t start, doing your own furnace repair in Covington, Georgia, can feel pretty overwhelming.
Troubleshooting your furnace might feel like an intimidating job when your heat won’t work. But it doesn’t have to be like that.
There are a few speedy, inexpensive fixes you can do on your own to prevent a furnace repair call.
If your furnace won’t turn on, won’t stay on or won’t ignite, try the troubleshooting list below before contacting an HVAC professional.
If you find you need help from a heating and cooling pro and live in Covington, Covington Air Systems can assist you. We can repair most makes of heating systems and also provide emergency furnace repair.
If it’s time for a new heating system, we also provide furnace installation.
While you’re talking with us, consider an annual furnace maintenance plan that could help you avoid problems in the future. We can tell you how frequently your furnace should be inspected by one of our NATE-certified Pros.
Follow our easy guide below to get to work on troubleshooting your furnace. Most of these steps don’t require mechanical skills.
Furnace Repair Checklist
1. Check the Thermostat
First, make sure your thermostat is instructing your furnace to turn on.
Digital Thermostat
Replace the batteries if the screen is blank. If the digital screen is jumbled, the thermostat may need to be replaced.
Make sure the switch is set to “heat” instead of “off” or “cool.”
Ensure the program is displaying the right day and time and is set to “run.” If you’re having a hard time overriding the program, set the temperature by using the up/down arrows and press the “hold” button. This will force the furnace to turn on if thermostat programming is causing trouble.
Increase the temperature setting to 5 degrees warmer than the room temperature.
If your furnace hasn’t started within few minutes, make sure it has power by toggling the fan switch from “auto” to “on.” If the fan doesn’t begin to run, your furnace could be without power.
Smart Thermostat
If you have a smart thermostat—like one made by Nest, Ecobee, Lux, Honeywell or Bosch—troubleshooting is very model-specific. Refer to the manufacturer’s website for help. If you still can’t get your Wi-Fi thermostat to work, call us at (770) 462-5319 for heating and cooling service.
2. Examine Breakers and Switches
Next, you will need to check if your breaker and furnace switch are on.
Find your house’s main electrical panel. If you don’t know where it is, keep an eye out for a gray metal box in your basement, garage or closet.
Make sure your hands and feet are dry before touching the panel or breakers.
Look for the breaker labeled “furnace” or “heat,” and make sure it’s switched “on.” If the breaker has tripped, it will be in the middle or “off” position.
Using one hand, firmly switch the breaker to the “on” position. If the breaker immediately trips and pops back to “off,” don’t touch it and contact a professional from Covington Air Systems at (770) 462-5319 right away.
No matter your furnace’s age or brand, it has at least one standard wall switch located on or by it.
Make sure the switch is flipped up in the “on” position. If it was turned off, anticipate your furnace could take up to five minutes to start. (If you don’t know where to find your furnace, check your basement, garage or utility closet. It could also be in a crawl space or attic.)