Your furnace is an integral part of your home. Without one, you wouldn’t be able to keep warm during the winter. Yet furnaces can have some issues that are more common than others.

Let’s review these issues and discuss what they might cost to fix so you know before you contact an HVAC technician. Some of the most common furnace repair problems include:

  • Furnace won’t turn on
  • Furnace doesn’t stay lit
  • Furnace won’t blow hot air
  • Furnace won’t turn off

1. The Furnace Will Not Turn On

There are a few reasons why your furnace won’t turn on, so make sure to check all of them.

  • Is your thermostat set right? Make sure it’s on “heat,” “auto” and that your preferred temperature is greater than the room’s current temperature. If you have a programmable thermostat, make sure it has new batteries.
  • Is the circuit breaker tripped? Your furnace can’t operate if it doesn’t have electricity. Reset the switch if it’s facing the outside of the electrical panel.
  • Is the furnace switch off? Your furnace has a power switch located on or near it. Because this switch resembles a light switch, it’s easy to unintentionally turn it off. If it was off, it may take your furnace a few minutes to start.
  • Is the air filter clean? A dusty air filter can cause a lot of issues for your furnace. Get a new one if you can’t see light through it.

Estimated Repair Cost

This issue can be complicated, so the estimated cost to repair it depends on what’s wrong.

2. My Furnace Ignition System Isn’t Working

Your furnace follows a certain sequence when it starts heating your home.

  1. Your thermostat detects the temperature has dropped and tells your furnace to start running.
  2. The draft inducer fan turns on to bring in fresh air for combustion.
  3. The gas valve opens for the burners, which are lit electronically.
  4. The flame sensor signals to your furnace the burners have been ignited.

If something is off during the sequence, your furnace will shut down as a preventive measure.

A couple of possible causes for this problem include:

  • Dirty or malfunctioning flame sensor. If the sensor doesn’t sense a flame, it will turn off your furnace to keep natural gas from spilling into your home. The ignition process corrodes flame sensors as time passes. While cleaning during annual furnace maintenance can help, yours may ultimately need to be replaced.
  • Bad limit switch. This safety feature will turn off your furnace if it detects backdrafting. Backdrafting is hazardous, because carbon monoxide and natural gas can leak into your home. These switches can malfunction due to age, damage or dust buildup.
  • Old thermostat. If your thermostat isn’t working correctly, your furnace won’t be able to run.
  • Dirty air filter. A dirty air filter can restrict airflow and force your furnace to shut down to prevent overheating. Make sure to replace yours every 30 to 90 days, or whenever you can’t see light through it.

Estimated Repair Cost

These costs are estimates, so it’s important to note yours may fluctuate based on your furnace’s brand and model.

  • Flame sensor: $350–$500
  • Limit switch: $150–$300
  • Thermostat: $150–$350
  • Furnace filter: $10-$30

3. The Furnace Blows Cold Air

In many cases, this problem is linked to a wrong thermostat setting or a dusty air filter that’s limiting airflow. Follow the steps above to fix the issue.

4. The Furnace Isn’t Shutting Off

If it’s very cold outside or you like your home to be warm, your furnace may be running for a long time.

If this isn’t the case, ensure your thermostat is set correctly and working properly. If your fan setting is at “on,” the blower motor will be going even when the furnace isn’t, so it’ll sound like your furnace is on all the time.

Alternatively, there might be a problem with the blower motor or your ductwork may be losing air, making your furnace run continuously to make up for the lost air.

Estimated Repair Cost

These costs are approximations, so it’s necessary to note yours may vary based on your furnace’s brand and model.

  • New blower motor: $250–$800
  • Seal ductwork: varies based on house size

Covington Air Systems Can Resolve Your Furnace Problems Quickly and Affordably

Furnace problems can be an expensive headache, but not when you call Covington Air Systems. We’ve been delivering the quality, affordable furnace repair Covington homeowners have relied on since year. Call us at (770) 462-5319 to receive your free estimate today.